Pladur Mallorca — drywall wall linings in Mallorca since 2004: direct from €27/m², semi-direct and self-supporting from €29.50/m². Phone: 627 829 723.
Drywall wall linings in Mallorca
A drywall wall lining is a second skin of plasterboard fitted on the inside of a wall to flatten it, insulate it against cold, heat or noise, or hide services. At Pladur Mallorca we install direct linings from €27/m², semi-direct and self-supporting linings from €29.50/m², and double-board self-supporting linings from €34/m² (November 2026 rates).
The basics
What a wall lining is and when you need one
Lining a wall means cladding its inner face with plasterboard. Unlike a partition, which divides two rooms, a lining does not create a new wall: it upgrades one that already exists — a facade, a party wall or a masonry partition — without hacking it off or re-plastering it.
You need one when:
- The wall is uneven, cracked or has old plaster, and you want a flat surface ready to paint.
- The facade lets heat in during summer and cold in during winter: a lining with insulation cuts air-conditioning and heating consumption by 20–35% in Mallorca homes.
- You can hear the neighbour through the party wall: a 7–9 cm hollow-brick wall insulates 33–38 dB and CTE DB-HR requires 50 dB between dwellings.
- Electrics, plumbing or air conditioning need routing without chasing a marés or stone wall.
It is dry construction: no rubble, no curing times, and the home stays liveable while the work is done zone by zone.

Comparison
Types of wall lining: direct, semi-direct and self-supporting
The three differ in how the board is fixed to the wall, which decides how much space is lost and whether insulation fits.
Direct, with bonding compound
Board bonded to the wall with dabs of compound. Flattening sound, dry walls when space is critical.
Semi-direct, on omega channels
Board screwed to omega furring channels fixed to the wall. Walls slightly out of plumb; leaves a minimal cavity for cabling.
Self-supporting, one board
Board on a track-and-stud frame independent of the wall. Thermal insulation, bridging damp and hiding services.
Self-supporting, two boards
Double board on the same independent frame. Acoustic insulation against neighbour noise.
November 2026 rates, VAT not included. Add-ons: special board (moisture-resistant, fire-rated or acoustic) +€3/m² on any type; cavity insulation, on self-supporting linings only, +€6/m² acoustic or +€7/m² thermal. See partition and wall-lining prices
The most installed system
Self-supporting wall lining
A self-supporting lining stands on its own frame of galvanised steel tracks and studs (M46 or M70) fixed to floor and ceiling, without leaning on the wall. That independence is its advantage: it absorbs out-of-plumb walls, leaves the original wall untouched — important on marés facades or damp walls — and creates a cavity that takes insulation and services. It is closed with BA13 board, moisture-resistant board in bathrooms and kitchens, and double board when the goal is acoustic. With 48 mm studs, 40 mm of insulation and one board it takes 61 mm; with 70 mm studs and double board, 96 mm. At Pladur Mallorca we install it from €29.50/m² with one board and from €34/m² with two; cavity insulation is added as an add-on.
When space is tight
Direct wall lining
In a direct lining the board is bonded to the wall with dabs of bonding compound, with no framing. It is the fastest way to flatten a sound wall and the one that takes the least space, but its limits are clear: the substrate must be dry, firm and reasonably plumb, it leaves no cavity for services and, against noise, it gains only 6–9 dB because it stays coupled to the wall. When the wall is somewhat more uneven, the semi-direct lining is used: the board is screwed to metal furring channels fixed to the wall, which correct the plane and leave a minimal cavity. Direct lining costs from €27/m² and semi-direct on omega channels from €29.50/m²; neither takes insulation.
By objective
Acoustic wall lining and thermal wall lining
Acoustic wall lining
Against neighbour noise the lining has to be self-supporting and decoupled: resilient band around the whole perimeter, mineral wool in the cavity and double board. That gains 12 to 17 dB, which the ear perceives as half the noise or less. Acoustic insulation is a €6/m² add-on: from €40/m² with double board.
See acoustic insulation in MallorcaThermal wall lining
On facades and exposed party walls the cavity is filled with 40–60 mm of mineral wool or EPS. The wall’s U-value drops from 1.60 to 0.38 W/m²K, the figure CTE DB-HE asks for in Mallorca’s climate zone B3, and heating and cooling consumption falls by 20–35%. Thermal insulation is a €7/m² add-on: from €36.50/m² with one board.
See interior thermal insulationRelated: drywall partitions · ETICS vs drywall wall lining · wall lining guide: what it is, types and price
Process
How we install a wall lining, step by step
Site visit and measurement
We check the wall (damp, plumb, services) and recommend the lining type. Fixed quote in 24–48 hours.
Setting out and framing
We mark the plane by laser and fix tracks and studs with resilient band around the perimeter.
Services and insulation
Cables and pipes run through the cavity and mineral wool goes between the studs, with no gaps.
Boarding
BA13 board screwed every 25 cm; moisture-resistant board in wet areas and double board for acoustics.
Joints and finish
Tape and compound in three coats, sanding and 24–48 hours of drying before painting.
A two-installer crew completes 20–30 m² a day: a 20 m² room is ready in 1–2 days.
Related articles
How to soundproof a wall with drywall
Decoupled acoustic lining step by step, dB gains and price per m² when the noise comes through a party wall.
Read articleWall lining: what it is, types and price
How direct, semi-direct and self-supporting linings differ, the space each takes and what it costs.
Read articleETICS vs drywall lining: which to choose
Insulating from the outside or from the inside: prices, when each one fits and two real cases.
Read articleIt is a plasterboard lining fitted on the inner face of an existing wall (facade, party wall or masonry partition) to flatten it, insulate it or route services without chasing. It can be bonded to the wall (direct), fixed to furring channels (semi-direct) or built on an independent stud frame (self-supporting), which is the one that takes insulation in the cavity.
A direct wall lining costs from €27/m²; semi-direct on omega channels, from €29.50/m²; self-supporting with one board, from €29.50/m², and self-supporting with two boards, from €34/m² (November 2026 rates, VAT not included). A special board — moisture-resistant, fire-rated or acoustic — adds €3/m². On self-supporting linings, cavity insulation is an add-on: €6/m² for acoustic and €7/m² for thermal.
It depends on the type. Direct lining takes the least, 3 to 5 cm including the board; semi-direct on furring channels stays at 4–6 cm, and self-supporting lining takes 6 to 10 cm per wall: 48 mm framing, 40 mm insulation and a 13 mm board add up to 61 mm; with 70 mm studs and double board, 96 mm.
Direct lining is for flattening a sound, dry and reasonably flat wall when space is critical. Self-supporting lining is the choice when insulation is needed, when the wall has damp, is out of plumb or has services to hide, and whenever the goal is acoustic: against neighbour noise, direct lining gains 6–9 dB and a decoupled self-supporting lining 12–17 dB.
One to two days for a 20 m² room and three to five days for a complete 80 m² flat, at 20–30 m² a day per two-installer crew. After joint treatment, allow 24–48 hours of drying before painting. The home stays liveable because the work is done zone by zone.
No major works licence or community permission is needed: it is interior work that does not affect the facade, the structure or the common elements. Some councils, such as Palma, Calvià, Inca or Manacor, ask for a prior minor-works notice, which we can file for you.
Quick contact
Need to line a wall in Mallorca?
Free site visit and fixed quote in 24–48 hours.
Tell us about your project
We'll call you to arrange the visit.