Pladur Mallorca — drywall partition and wall prices in Mallorca 2026. Finished partition wall from €45/m² (both sides, materials and labour), acoustic partitions up to Rw 56-58 dB from €58/m², wall linings from €29/m². Room division example: 10 m² partition for €520-580. Installers since 2004 with 6,000+ projects in Palma, Calvia, Manacor, Inca and all of Mallorca. Tel: +34 627 829 723.
A drywall partition in Mallorca costs €45 to €72/m² of finished wall depending on studs, boards and mineral wool; a wall lining starts at €29/m². Published rates by system, a room-division example and a fixed quote in 24h. Since 2004, 6,000+ projects.
Real price per m²
A drywall partition in Mallorca costs between €45 and €72 per m² of wall finished on both sides, including galvanised steel framing, Placo or Knauf board, joint treatment and labour. The exact price depends on three variables: stud width (48, 70 or 98 mm), the number of boards per side and the mineral wool in the cavity — which is what sets the acoustic insulation in dB of each system.
On this page we publish the same rates we quote with: a table by system with its acoustic insulation, the difference between a partition and a wall lining, an indicative example of dividing a room and the factors that move the price. We have been installers since 2004, with 6,000+ projects across Mallorca; your fixed quote arrives within 24h of the free visit.
See alsoall drywall prices·partitions service·drywall vs brick
Drywall partitions from €45/m² of finished wall (both sides). 48-100 mm frame, Placo/Knauf board and ready-to-paint finish. Install in 1-3 days per partition.
Materials + labour included. VAT not included (21%). Indicative 2026 pricing; the final figure depends on surface area, access and complexity.
| Service | From | Up to | Unit | Includes |
|---|---|---|---|---|
M48 partition (closets and utility rooms) From €45/m². 48 mm studs and one BA13 board per side: just 7.3 cm total thickness, ideal where every centimetre counts. With 40 mm wool it reaches Rw ≈ 41 dB (Placo datasheet). | 45€ | 50€ | m² | M48 studs2x BA13 boardOptional 40mm woolReady-to-paint finish |
Simple partition wall (M70) From €45/m². Partition 10 cm thick with M70 studs and one BA13 board per side. Rw ≈ 38 dB bare and 44-45 dB with 45 mm wool (Placo datasheet). Weighs 25 kg/m² vs 120 kg/m² for a brick wall. | 45€ | 52€ | m² | M70 studs2x BA13 boardCompound and tapeReady-to-paint finish |
Partition with acoustic insulation From €52/m². Double BA13 board and 45 mm mineral wool in the cavity. Reaches 45-50 dB acoustic reduction, above the CTE-HR 47 dBA minimum between dwellings. | 52€ | 58€ | m² | M70 studs4x BA13 board45mm mineral woolPerimeter band |
M98 double-board acoustic partition From €58/m². 98 mm studs, double board per side and 70 mm mineral wool: Rw 56-58 dB per Placo datasheet (SAD system). For bedrooms adjoining venues, plant rooms and dwelling separation. | 58€ | 72€ | m² | M98 studs4x BA15 board70mm mineral woolPerimeter band |
Fire-rated partition EI-60 From €52/m². Placo/Knauf EI-60 certified system (60-minute fire resistance) per CTE DB-SI. Required for shops, hotels and holiday flats. | 52€ | 75€ | m² | Fire-rated frameDF90 boardPerimeter sealingEI-60 certification |
Self-supporting wall lining From €29/m². Second drywall face over facade or party wall with insulation in the cavity. Cuts AC consumption by 20-35% in Mallorca homes. | 29€ | 48€ | m² | M46/70 studsInterior insulationBA13 boardFinal finish |
From €45/m². 48 mm studs and one BA13 board per side: just 7.3 cm total thickness, ideal where every centimetre counts. With 40 mm wool it reaches Rw ≈ 41 dB (Placo datasheet).
From €45/m². Partition 10 cm thick with M70 studs and one BA13 board per side. Rw ≈ 38 dB bare and 44-45 dB with 45 mm wool (Placo datasheet). Weighs 25 kg/m² vs 120 kg/m² for a brick wall.
From €52/m². Double BA13 board and 45 mm mineral wool in the cavity. Reaches 45-50 dB acoustic reduction, above the CTE-HR 47 dBA minimum between dwellings.
From €58/m². 98 mm studs, double board per side and 70 mm mineral wool: Rw 56-58 dB per Placo datasheet (SAD system). For bedrooms adjoining venues, plant rooms and dwelling separation.
From €52/m². Placo/Knauf EI-60 certified system (60-minute fire resistance) per CTE DB-SI. Required for shops, hotels and holiday flats.
From €29/m². Second drywall face over facade or party wall with insulation in the cavity. Cuts AC consumption by 20-35% in Mallorca homes.
Want to know the exact price of your project?
The on-site visit is free. You'll receive the detailed quote within 24-48 hours.
Partition vs wall lining
They solve different problems and their prices are far apart. A partition divides; a lining improves the wall you already have.
A complete new wall with its own frame and board on both sides. It is the answer for splitting a room, creating a bedroom or closing off an office. The price moves with the studs (M48/M70/M98), the number of boards and the wool: from €45/m² for the M70 distribution wall to €58-72/m² for the M98 acoustic system with Rw 56-58 dB.
A single face of board mounted over an existing wall, with a cavity for insulation. It does not divide: it upgrades the wall you already have. With mineral wool it cuts air-conditioning consumption by 20-35% and raises the acoustic comfort of facades and party walls.
Not sure which one your project needs? See the fullpartitions and wall linings service.
Indicative budget example
The most common job we quote: turning a bedroom or living room of about 20 m² into two rooms with a partition 4 m long by 2.5 m high — 10 m² of wall. Calculated from the published rates on this page; every job is confirmed with a fixed quote after the free site visit.
10 m² × €45-52/m²
€450-520
One BA13 board per side, no wool: 38 dB. For dressing rooms and daytime areas where sound privacy is not critical.
10 m² × €52-58/m²
€520-580
Double board and 45 mm mineral wool: 45-50 dB. The system we install when the division creates bedrooms.
10 m² × €58-72/m²
€580-720
98 mm studs, 70 mm wool and double board per side: Rw 56-58 dB per Placo datasheet.
Included: framing, boards, perimeter band, joint compound and tape, ready-to-paint finish. Executed in 1-2 days.
Indicative amounts before VAT, calculated from our published 2026 rates. They do not include a door with frame, new electrical points or painting — those are quoted separately at the free visit.
What moves the price
Two partitions with the same surface area can be quoted differently. These are the six variables that explain almost every difference in €/m².
From €45/m² for M48/M70 up to €58-72/m² for M98: a wider stud means more cavity for wool and more insulation (from 38 to 58 dB), but also more cost and 3-5 cm more floor space used.
A second board per side adds mass and dB. Specialty boards raise the system price: moisture-resistant H1 for bathrooms and kitchens (UNE-EN 520), DF90 fire board in the EI-60 partition (€52-75/m², CTE DB-SI) or high-density acoustic board such as Placo Phonique.
Moving from the plain M70 to the acoustic double-board partition with 45 mm wool costs about €6-7/m² more and lifts insulation from 38 to 45-50 dB: the most cost-effective upgrade in the budget when the wall separates bedrooms.
Setting out, travel and protecting the home have a fixed cost: a single 10 m² partition comes out at a higher €/m² than a full 40-60 m² redistribution. That is why rates are published as a range.
Every door opening needs a reinforced frame, and heights above 2.6 m call for heavier or braced studs. Curves and changes of direction add cutting and finishing time.
Running cables and plumbing through the cavity is a drywall advantage (no chasing), but new points are an electrician item. Timber reinforcements for hung furniture (80-120 kg per linear metre) must be planned before closing the wall.
Drywall vs brick
Finished price
Drywall €45-52/m²
Brick €55-70/m² with base coat and plaster
Build time
Drywall 1-2 days
Brick 5-10 days due to drying
Weight on the slab
Drywall 25-35 kg/m²
Brick 100-150 kg/m²
Brick only pays off when the wall carries structural loads, suffers permanent rising damp or is an exterior facade — rare cases in interior renovations.
Nuestro trabajo
Fotos reales de proyectos ejecutados en toda Mallorca.
Drywall partitions dividing an open-space office in Mallorca
Drywall partition walls in a villa hallway in Mallorca
New drywall walls in a full flat renovation in Santa Catalina
Drywall partition with built-in wardrobe in a Mallorca bedroom
Todas las imágenes corresponden a proyectos reales ejecutados por nuestro equipo en viviendas y locales de Mallorca.
¿Quieres ver más proyectos?
Tenemos más de 6.000 proyectos ejecutados en toda Mallorca.
Between €45 and €72/m² of wall finished on both sides, materials and labour included (VAT not included). By system: M48 partition €45-50/m², M70 distribution partition €45-52/m², acoustic double-board partition with 45 mm wool €52-58/m², M98 double-board partition with 70 mm wool €58-72/m² and EI-60 fire-rated partition certified under CTE DB-SI €52-75/m². Installation takes 1-3 days per partition and we deliver a fixed quote within 24h of the free technical visit.
Indicative budget example calculated from our published 2026 rates: dividing a room of about 20 m² requires a partition 4 m long by 2.5 m high, that is 10 m² of wall. With the acoustic double-board partition and 45 mm mineral wool (€52-58/m²) it comes to €520-580 + VAT, executed in 1-2 days. The economy version with one board per side (€45-52/m²) is €450-520 and the maximum-insulation M98 option (€58-72/m²) is €580-720. It does not include a door, new electrical points or painting: those items are quoted separately at the free visit.
Yes, with the right anchor: a toggle fixing (Fischer or Spit type) holds up to 40 kg per point and a metal expansion anchor up to 50 kg per point, plenty for TVs, pictures and shelving. For loaded kitchen wall units we embed an 18 mm timber reinforcement in the frame during assembly, which supports 80-120 kg per linear metre. For loads above 150 kg/m we build a reinforced section with double 70 mm studs. Tell us at the technical visit where the loads will go: planning it during assembly costs far less than reinforcing the wall afterwards.
Drywall: €45-52/m² finished and ready to paint, versus €55-70/m² for a brick partition with base coat and plaster finish. It also goes up in 1-2 days (brick needs 5-10 because of drying times), weighs 25-35 kg/m² versus 100-150 kg/m² on the slab and produces no rubble. Brick only pays off for structurally loaded walls, permanent rising damp or exterior facades.
A partition is a complete new wall with its own frame and board on both sides (from €45/m²), used to divide spaces. A wall lining is a single face of board mounted over an existing wall (self-supporting from €29/m²), used to thermally or acoustically insulate facades and party walls or to hide services without chasing; with insulation in the cavity it cuts air-conditioning consumption by 20-35% in Mallorca homes. If you need to create a room, a partition; if your problem is cold, heat or noise from an existing wall, a lining.
Per Placo system datasheets: M48 partition with 40 mm wool, Rw ≈ 41 dB; M70 with one board per side, 38 dB bare and 44-45 dB with 45 mm wool; acoustic double-board partition with wool, 45-50 dB; and M98 double-board partition with 70 mm wool, Rw 56-58 dB (SAD system). For reference, CTE DB-HR requires 50 dBA DnT,A insulation between separate dwellings. Between bedrooms in the same home, the €52-58/m² acoustic partition is the price/performance balance we install most.
From 1 to 3 days per partition depending on size and services. Day 1: setting out, framing, board on one side, mineral wool and running services. Day 2: closing the second side and joint treatment. Day 3, if needed: final Q3 finishing pass. Compounds dry in 24h and the wall is ready to paint. A room division of about 10 m² is usually finished in 1-2 days, versus 5-10 days for brick with its drying times.
The rates include galvanised steel framing, Placo or Knauf board, perimeter band, joint compound and tape and labour with a ready-to-paint finish. They do not include VAT (21% standard; on renovations of homes over 2 years old the 10% rate may apply if the legal requirements are met), painting, or electrical and joinery work. The written quote we deliver in 24-48h itemises every line so you can compare without surprises.
These are the real figures we work with at Plaquistas y Acabados SL since 2004 — drywall across Mallorca with our in-house team, no subcontracting.
€/m² finished wall
45-72
Published 2026 rate, both sides finished
days per partition
1-3
Dry assembly, no rubble
top insulation (M98)
Rw 58 dB
Placo SAD system datasheet
projects since 2004
6,000+
Plaquistas y Acabados SL
Source: internal figures of Plaquistas y Acabados SL (2004-2026).
Quick contact
Free site visit and a written fixed quote in 24h. No obligation.
We'll call you to arrange the visit.
Full drywall installation service across the island.
Professional installation of drywall systems with high-quality finishes.
Plaster ceilings, mouldings, cornices and heritage restoration.
Modern ceilings with integrated LED lighting.
Dividing partitions and wall linings to reconfigure spaces.
Soundproofing solutions to improve acoustic comfort.
Thermal insulation to improve energy efficiency.
Full interior renovations using drywall systems.
Bathroom renovations with moisture-resistant board, no demolition.
Certified professional fitters for jobs of any size.
Renovation of holiday apartments with guaranteed timelines.
Drywall for developers, contractors and architecture studios.